can i please come dyno??

[a4wdhybrid]

:( :(

holy ish dude..w/ the 110 and cold weather....if this thing isnt putting 350 to the wheels i dont want to know what 350+ to the wheels feels like :eek:

[evan@absolute]

:( :(

holy ish dude..w/ the 110 and cold weather....if this thing isnt putting 350 to the wheels i dont want to know what 350+ to the wheels feels like :eek:
If you want i'll take you for a ride:oddeye-hellyeah: I can show you ~440.
But as for the dyno lets find a day. You want to do some tuning or should we have a dyno day?

[a4wdhybrid]

id like to be able to do some tuning if possible

[evan@absolute]

well I have something to try as well so maybe we can do it....I'll pm you ;)

[Yareka]

If you want i'll take you for a ride:oddeye-hellyeah: I can show you ~440.

thats so cruel:)

[DJMario]

Evan, how much is it for a dyno?

[B Dub 9NineTeen]

i think its 75 for like 3 pulls i think

[evan@absolute]

i think its 75 for like 3 pulls i think
that it it. Or I will do it hourly as well. $125/hour

[jtbizzy]

Hmm....GIAC X+ update + Dyno day =:)

[t0ad99]

now I feel all rushed to get my leak fixed and ready to turn up the boost..

I just always get so lazy - maybe i can get some lift time for a spliff.. i should call my new buddy..

wait a second, this is that place I called before I decided to sit in traffic for fun going to greenboro ;)

GIAC software and garrett turbos were "sketchy" said dude on the tele.
I don't suppose if I gave you my ECU number, you could find out what file was most likely soldered in my ecu?

[TurboMatt]

now I feel all rushed to get my leak fixed and ready to turn up the boost..

I just always get so lazy - maybe i can get some lift time for a spliff.. i should call my new buddy..

wait a second, this is that place I called before I decided to sit in traffic for fun going to greenboro ;)

GIAC software and garrett turbos were "sketchy" said dude on the tele.
I don't suppose if I gave you my ECU number, you could find out what file was most likely soldered in my ecu?
what place?????

[a4wdhybrid]

you have no idea how many times i had to read that post before it started to make sense

[t0ad99]

yeah, kinda vague..

What place, Absolute Automotive, Dyno in Durham, giac dealer?
I called, last week I think. About a 1.8 beetle w/ a k04 GIAC chip.

But yeah, I was supposed to call absolute back to tell them the ecu SN# - but since the whole garrett turbos and GIAC software being sketchy, it just led me belive it would prob be a hassle.

so I drove over to carr industries in greensboro and met Travis from apextunning - to find out, there was some miscommunication and the stage3 file I wanted for my 00 beetle didn't exist.

I was just thinking, wow what a small world. just as cool as having the only dyno in the area ;)

[TurboMatt]

oh ok. see im a tech at Carr Industries. so i was just wondering. just ask evan about giac. hes very knowlegdable about that shit plus a nice guy:kissy: . hahaha. never hurts to ask.

[evan@absolute]

now I feel all rushed to get my leak fixed and ready to turn up the boost..

I just always get so lazy - maybe i can get some lift time for a spliff.. i should call my new buddy..

wait a second, this is that place I called before I decided to sit in traffic for fun going to greenboro ;)

GIAC software and garrett turbos were "sketchy" said dude on the tele.
I don't suppose if I gave you my ECU number, you could find out what file was most likely soldered in my ecu?
wow this is hard to understand. I think you are the guy that called me a while back. If you get me your ecu # then we can go from there. I never said the GIAC was sketchy I said whether or not there was a file for it was hard to say without the ecu #. GIAC has done GT28rs and GT2871 fies for a lot of the 02 up mk4 stuff now. They may have one for a NB but I will not know without ht ecu#. The last thing I want to do is waste both of our time if there isn't one for it.

[t0ad99]

cool deal - the file seems to be doing good so far w/ the new turbo elimin GTRS at 1bar.

but before I go and turn up the boost that much more I wanted to put bigger injectors in. The chip has been doing well up to this point, so i'm at the point thinking why not?!

BOSCH 0261206506

vw 06A 906 032 C

from what it sounds there aren't very many options for the 1.8 2000 NB, so i would think limiting the files wouldn't be to bad..

it was supposed to be for a k04

thanks

[t0ad99]

yeah - I didn't speak with you, it was with someone else, I can see how that could have been meshed up.

i'll have to review my posts a little more next time and try not to mesh up what i'm saying - don't need anything taken the wrong way here..

[evan@absolute]

I don't see a file for a GT28 listed. I have emailed them.

[sweaty meat hammer]

huh? Did I just hear Ian say he has 350 to the wheels?:) Man, Id say he may have a bit more than that. I hope my boy puts down 375+

BTW, nobody here has 575 to the wheels but me! Im serious. I just counted in myhead ahow long it took me to get to liek 120ish and it was like 7 seconds or less. Id say thats ruoughly around 750 or 550 wheel or crank hp. Roughly.

Yes Im drinking again!:)

[a4wdhybrid]

i plan on buying lots of 110 and seriously cranking the boost

eff it..i want to see some #'s

[jtbizzy]

huh? Did I just hear Ian say he has 350 to the wheels?:) Man, Id say he may have a bit more than that. I hope my boy puts down 375+

BTW, nobody here has 575 to the wheels but me! Im serious. I just counted in myhead ahow long it took me to get to liek 120ish and it was like 7 seconds or less. Id say thats ruoughly around 750 or 550 wheel or crank hp. Roughly.

Yes Im drinking again!:)

Damn, what are you drinking Sweaty because I want some of that.

[sweaty meat hammer]

Dude, Same shit just in more quantity this year! Its non other than the Grolsch-mister!

Think some of the boys like Ian and Pinky will enjoy this site!

http://www.grolsch.co.uk/home.html

[evan@absolute]

man you need a triple x throw down. Molson triple x that is!

[sweaty meat hammer]

hahahaha, I actually like tha shit too. Its really good , but I cant turn my back on grolsch. Ive been drinking that since I was just a wee lad!:D

[a4wdhybrid]

i prefer the red light district ;)

[sweaty meat hammer]

I know you do!:oddeye-hellyeah: :oddeye-hellyeah:

[a4wdhybrid]

so why arent you dyno'ing?

[sweaty meat hammer]

I guess I will, but I thought Id give some other people a chance for a while. Trust me. If I dyno, you all will be very upset.:D Im talkin like mad vanilla flavored exhaust scented 600+ ponies out the rear. Stainless steel that it

[a4wdhybrid]

i just hope my ish stays in one piece long enough to get on the dyno again

it seems to be running fairly strong/smooth

ive been beating the ish out of it too :smack:

[jtbizzy]

Shouldn't all the non red light districts in Amsterdam be known as the "green" light districts.:gt-bb-chongin:

[t0ad99]

if you have time, what files are listed for my ECU? just so I have some idea what i'm working with.

thanks