Poly Bushings

[jetta-the-hut]

How hard is it to change out the bushing in the supension and go with poly. Do you really need a press to get them in or can you heat everything up and use a rubber mallet. I found a aftermarket set for 50 bucks thats why i'm asking.

[pinky]

which bushings specifically are you asking about?

[jetta-the-hut]

I was looking at a simular kit to this.
http://www.bahnbrenner.com/vw_audi/Bushings/Complete_Polyurethane_Kit___MK2___MK3.html

[pinky]

you will need to press the CA busings and rear beam bushings (if you replace them, not to add inserts, which arent worth it)

[jetta-the-hut]

How long (estimate) would it take to replace these? If a press was there.

[pinky]

control arm r&r is about 30 minutes... maybe 15 to do the bushings if you have the right tools..

you can also use a vice to press them