Any thoughts on this Evan?

[Andrew149]

what do you think about this airbag light ive cleared it out with vagcom once already came back 50miles later

http://i36.photobucket.com/albums/e15/andrew149/2005%20gti/IMG_20111001_011042.jpg
http://i36.photobucket.com/albums/e15/andrew149/2005%20gti/IMG_20111001_012907.jpg

[Vampire Cockroach]

check fuses yet?

[evan@absolute]

I wouldn't be doing anything fancy. Just checking connections to start with.

[Andrew149]

Nothing fancy yet I cleared it out again so far 100miles it has turned off but this airbag light is the curtain as in the side of my seat correct? So when you say check connection look under the seat right?

Sent from my MB860 using Tapatalk

[sciroccodriver]

Nothing fancy yet I cleared it out again so far 100miles it has turned off but this airbag light is the curtain as in the side of my seat correct? So when you say check connection look under the seat right?

Sent from my MB860 using Tapatalk



Look under the seat and you'll see the connectors towards the front. Clean them with deoxit or something similar. When you put them back together, use a zip tie around the connector to keep it super tight. Mine had this problem when I bought the car and despite cleaning the connectors, nothing fixed it until I zip tied them. Sounds stupid, but it worked. I've had the car like 3 years now and no more problems with the damn thing.

[Andrew149]

Look under the seat and you'll see the connectors towards the front. Clean them with deoxit or something similar. When you put them back together, use a zip tie around the connector to keep it super tight. Mine had this problem when I bought the car and despite cleaning the connectors, nothing fixed it until I zip tied them. Sounds stupid, but it worked. I've had the car like 3 years now and no more problems with the damn thing.

Doesn't sound stupid at all that was the fix that most people did on the Audi b5 passenger side
Do you know the color of the airbags wire?
Sent from my MB860 using Tapatalk

[VDUBNLUVN]

Look under the seat and you'll see the connectors towards the front. Clean them with deoxit or something similar. When you put them back together, use a zip tie around the connector to keep it super tight. Mine had this problem when I bought the car and despite cleaning the connectors, nothing fixed it until I zip tied them. Sounds stupid, but it worked. I've had the car like 3 years now and no more problems with the damn thing.

clip and butt connect. done

[veedubtek]

buncha fukkin chooches round here I swear....READ THE FUCKING CODE. the crash sensor for the side airbag. a quick google prolly would tell you that sensor is under the carpet...all 3 codes for the same sensor like that sounds like it's under water. got a leak somewhere?

wasn't I supposed to fix your trans at some point? you chooch out on that?

[sciroccodriver]

clip and butt connect. done

Stay away from my butt. :eek::pimp::eek:

[Andrew149]

buncha fukkin chooches round here I swear....READ THE FUCKING CODE. the crash sensor for the side airbag. a quick google prolly would tell you that sensor is under the carpet...all 3 codes for the same sensor like that sounds like it's under water. got a leak somewhere?

wasn't I supposed to fix your trans at some point? you chooch out on that?


Yeah i had evan fixed the trans it wasnt anything personal at all

2nd gear was toasted 1st and 2nd gear syncro's were bad

[veedubtek]

lol, I ain't mad....what'd I quote? $200 parts and labor? lol...yeah, I ain't mad about that at all. was just curious if I still had to do that at some point.

[Andrew149]

Did a little claybar work today

http://tapatalk.com/mu/20805c11-d822-6b01.jpg

Sent from my MB860 using Tapatalk

[Andrew149]

Did this today so much fun when the bolt breaks off the flange http://tapatalk.com/mu/2080b13c-4de9-ccb8.jpg

Sent from my MB860 using Tapatalk

[Vampire Cockroach]

i might be the wrong person to ask this but... why are you making a build thread in a sponsor forum? :gt-bb-chongin:

[Andrew149]

i might be the wrong person to ask this but... why are you making a build thread in a sponsor forum? :gt-bb-chongin:

too lazy to post it anywhere else but not really a built thread once this is on. evan is doing the tune and than thats pretty much it engine wise besides a inlet pipe :02gb-screwit: ko3s FTW

[Andrew149]

Downpipe Welded on and WOW what a torque gain makes me smile when i get on the gas now cant wait for tune

[M-Dub]

LOL Andrew... make your own thread fool!

[Andrew149]

LOL Andrew... make your own thread fool!

Maby I will ;)

Sent from my MB860 using Tapatalk

[Andrew149]

Maby I will ;)

Sent from my MB860 using Tapatalk

Evan with the mods of the car what is better to go with the car for cooling a new intercooler or a meth kit?

Was looking to go this route

http://motorlust.com/save-the-ponies-eurosports-new-front-mount-intercooler-for-vw-18t-cars-kills-heat-and-saves-power/

or this for meth stage 2 kit

http://www.snowperformance.net/product.php?pk=58

[Vampire Cockroach]

or this for meth stage 2 kit

http://www.snowperformance.net/product.php?pk=58

if you are considering going w/m, i have a kit that is taking up space and i have been trying to sell for a while now. originally came from absolute as a matter of fact. same kit as that one but you will need to source a few pieces.

much cheaper than new. pm me if you are interested.

[Andrew149]

if you are considering going w/m, i have a kit that is taking up space and i have been trying to sell for a while now. originally came from absolute as a matter of fact. same kit as that one but you will need to source a few pieces.

much cheaper than new. pm me if you are interested.

Pm'd

[Andrew149]

New wheels http://img.tapatalk.com/474d4656-fdc5-f25b.jpg

Sent from my GSH-I777